the a bc 55 0 series of open frame power supplies feature a wide universal ac input range of 90 C 264 vac, offering up to 55 0 w of output power with forced air cooling, or 250 w with conduction cooling in a compact footprint, with a variety of isolated single output voltages. t he high efficiency and high power density of the abc family ensures minimal power loss in end - use equipment, thereby facil itating higher reliability, easier thermal management and meets regulatory approvals for environmentally - friendly end products. these power supplies a re ideal for medical, telecom, d atacom, industrial equipment and other applications. ? 5 x 3 x 1.5 inch form f actor ? up to 55 0 watts with forced air cooling ? efficiencies up to 9 2 % ? - 40 t o 70c operating temperature ? 12 v / 0.5 a fan output, thermal shut - down feature ? mtbf >3 million hours as per telcordia sr - 332, i ssue 3 ? rohs compliant ? ce marked ? instrumentation ? lighting ? industrial applications ? applied computing ? renewable energy ? test and measurement ? robotics ? wireless communication
2 ABC550 series tech.support@psbel.com a bc 550 - 1t 12 12 v 9.17 a 16.67 a 41.67 a 0.0 a 2 % a bc 550 - 1t 15 15 v 7.33 a 13.33 a 33.33 a 0.0 a 2 % abc 550 - 1t 24 24 v 6.25 a 10.42 a 22.92 a 0.0 a 1% abc 550 - 1t 30 30 v 5.00 a 8.33 a 18.33 a 0.0 a 1% abc 550 - 1t 48 48 v 3.13 a 5.21 a 11.46 a 0.0 a 1% abc 550 - 1t 58 58 v 2.59 a 4.31 a 9.48 a 0.0 a 1% specifications are for nominal input voltage, 25c unless otherwise stated. input voltage universal ( derate from 100% at 115 vac to 78% at 90 vac) 90 - 264 vac / 390 vdc input frequency 47 - 63 hz input current 115 vac: 230 vac: 6 a max. 3 a max. no load power 115 vac: 230 vac: < 0.5 w < 0.7 w inrush current 115 vac: 230 vac: 264 vac: 25 a 45 a 75 a leakage current 115 vac: 230 vac: < 200 a < 400 a power factor @ full load > 0.95 switching frequency pfc resonant 70 to 130 k hz 68 to 80 k hz output power 3 forced air cooled: conduction cooled: convection cooled: up to 550 w up to 250 w up to 150 w efficiency ( typical @ 230 vac full load ) 48 v : 24 v : 12 v, 15 v: 92 % 91% 90% hold - up time (typical) full load convection load conduction load > 16 ms > 55 ms > 30 ms line regulation +/ - 0.5% load regulation +/ - 1% transient response 50 - 100% step load change, at 0.1a/ s slew rate, 50% duty cycle, 50 hz = 5% recovery time < 5 ms 1 refer recommended conduction plate & clearance on page 8 . 2 ripple is peak to peak with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with a 0.1 f capacitor at rated line voltage and load ranges. output ripple can be more than 10% of the output voltage. 3 combined ou tput power of main output, fan supply shall not exceed max. power rating.
ABC550 series 3 asia - pacific +86 755 298 85888 europe, middle east +353 61 225 977 north america +1 408 785 5200 ? 201 7 bel power solutions & protection bcd.00831_a b voltage adjustment +/ - 3% rise time typical 55 ms set point tolerance 4 +/ - 1% over current protection hiccup mode / auto r ecovery > 110% over voltage protection hiccup mode / auto r ecovery 110 to 140% short circuit protection hiccup mode / auto r ecovery operating temperature 5 startup guaranteed with spec . deviation - 40 to +70c - 40 to 0c storage temperature - 40 to +85c relative humidity non - condensing 5% to 95% altitude operating: non - operating: 16,000 ft. 40,000 ft. conducted emissions en55032 - b, cispr22 - b, fcc part15 - b pass radiated emissions en 55032 a ; with external core (king core k5b rc 25x12x15 - m in input cable) pass level b input current harmonics en 61000 - 3 - 2 class d voltage fluctuation and flicker en 61000 - 3 - 3 pass esd immunity en 61000 - 4 - 2 level 3, criterion a radiated field immunity en 61000 - 4 - 3 level 3, criterion a electrical fast transient immunity en 61000 - 4 - 4 level 3, criterion a surge immunity en 61000 - 4 - 5 level 3, criterion a conducted immunity en 61000 - 4 - 6 level 3, criterion a magnetic field immunity en 61000 - 4 - 8 level 3, criterion a voltage dips, i nterruptions en 61000 - 4 - 11 criterion a & b isolation voltage input to output: ( f or ite applications) input to gnd: 3 000 vac 1500 vac safety standard(s) approved to the latest edition of the following standards: csa/ul60950 - 1, en6095 0 - 1 and iec60950 - 1. agency approvals nemko, ul, c - ul ce mark complies with lvd directive 4 fan supply output voltage tolerance incl. set point accuracy, line and load regulation is +/ - 10% and ripple and noise is less than 10%. 5 thermal shutdown feature: the power supply goes in hiccup mode when the temperature of substrate pcb exceeds 110 c (+/ - 10 c).
4 ABC550 series tech.support@psbel.com ac input connector j1 pin 1 pin 2 pin 3 ac line not fitted ac neutral jst : b3p - vh - b(lf)(sn) or equivalent mating: vhr - 3m or equivalent pins : svh - 41t - p1.1 or equivalent dc output connector (screw terminal) j2 pin 1 pin 2 v 1 + ve v1 - ve 6 - 32 inches screw pan hd mating: designed to accept ring tongue terminal amp: 8 - 31886 - 1, wherein one 16 awg (max) wire can be crimped. note: one ring tongue terminal with 16 awg is recommended for current up to 11 a only. use multiple tongue terminals with wire for more current. aux (fan) output j3 pin 1 pin 2 fan + ve fan - ve amp: 640456 - 2 mating: 640440 - 2 earth j4 molex: 19705 - 4301 mating: 19003 - 0001 weight approx. 500 g dimensions 127 x 76.2 x 38.1 mm ( 5 x 3 x 1.5 inches ) figure 1. mechanical drawing
ABC550 series 5 asia - pacific +86 755 298 85888 europe, middle east +353 61 225 977 north america +1 408 785 5200 ? 201 7 bel power solutions & protection bcd.00831_a b de - rate linearly from 100% at 115 vac to 78% at 90 vac convection load: 110 w up to 50 c de - rate above 50 c @ 2.5% per c conduction load: 200 w up to 50 c de - rate above 50 c @ 2.5% per c forced air cooled load : 500 w up to 50c de - rate above 50 c @ 2.5% per c convection load: 150 w up to 50 c de - rate above 50 c @ 2.5% per c conduction load: 250 w up to 50 c de - rate above 50 c @ 2.5% per c forced air cooled load: 550 w up to 50c de - rate above 50 c @ 2.5% per c
6 ABC550 series tech.support@psbel.com for reliable and safe operation, please make sure the maximum component temperatures given in table below is not exceeded. top pcb bottom pcb indent no description maximum temp. allowed (c) 1 common mode chokes 95 2 input bulk capacitors 90 3 differential choke 110 4 boost choke 110 5 output transformer 125 (for 12 v & 15 v) 110 (for 24 v,30 v,48 v,58 v) 6 output capacitor 90 7 bridge rectifier 120 8 aluminum clad pcb 105 9 output rectifiers 110
ABC550 series 7 asia - pacific +86 755 298 85888 europe, middle east +353 61 225 977 north america +1 408 785 5200 ? 201 7 bel power solutions & protection bcd.00831_a b fixing option - 1 fixing option - 2 figure 2. mounting options
8 ABC550 series tech.support@psbel.com conduction power rating mentioned in the table is with additional aluminum base plate of 3 mm thickness with 177.8 mm (7in) length & 101.6 mm (4in) width. clearance of minimum 15 mm above the component height is recommended for better thermal management. nuclear and medical applications - products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. technical revisions - the appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. specifications are subject to change without notice.
|
